1.   “基于记忆合金的驱动力装置研究技术合作项目”，华为技术有限公司，参与，（2020）

2.  “高性能冷镦钢丝皮膜评价及热处理新工艺的研发”，宝钢金属有限公司，参与，（2020）

3.  “纳微复合结构超黑新材料的可控制备及光学性能调控研究”（51771052），国家自然科学基金面上项目，承担，（2018-2021）

4.  “金属玻璃脱合金化制备燃料电池用纳米多孔催化剂”（51001026），国家自然科学基金青年基金,承担

5.  “金属玻璃脱合金法制备无酶电流型葡萄糖传感材料”(6812000013)，教育部留学回国人员科研启动基金，承担

6.  “金属玻璃脱合金法制备新型葡萄糖传感材料”（104.205.2.5），东南大学重大指导专向基金，承担

7.  “金属玻璃脱合金法制备新型葡萄糖传感材料”（7912000011)，南京市留学人员科技活动项目择优资助项目，承担

8.  “纳米复合硬质涂层中非晶组织的控制与致韧机理研究”（51201033），国家自然科学基金青年基金, 参与

9.  “高活性纳米碳球的可控合成及应用”，丽港稀土公司，承担

10.“高活性纳米碳球的后处理技术”，丽港稀土公司，参与

发表论文：

1.      CuiP., Wang T.,Zhang X., Ba C., Wu Y., Peng K.,Zeng Y.,Jiang, J., NiCoCuP foam with a 3D hierarchical porous structure as all-pHefficient and stable HER electrocatalyst，INTERNATIONAL JOURNAL OF HYDROGENENERGY，48(2023):16725-16732

2.      Bai,X., et al., Effect of ion control strateaies on the deposition rate andproperties of copper films in bipolar pulse high power impulse magnetronsputtering. Journal of Materials Science, 2023. 58(3): p. 1243-1259.

3.      Bai,X., et al., In-situ crystalline TiNi thin films deposited by HiPIMS at a lowsubstrate temperature. Surface and Coatings Technology, 2023. 455: p. 129196.

4.      Zhang,Z., et al., Electrocatalytic oxygen evolution performance of high entropyFeCoNiMoCr Alloy thin film electrode. Chinese Journal of Materials Research,2021. 35(3): p. 193-200.

5.      Y.Q. Zeng, J. S. Yu, Y. Tian, A. Hirata, T. Fujita, X. H. Zhang, N. Nishiyama, H.Kato, J. Q. Jiang, A. Inoue，M.W.Chen，Responseto the commentary by Robert Tournier and Michael Ojovan on our publicationentitled "Improving glass forming ability of off-eutectic metallic glassformers by manipulating primary crystallization reactions". ScriptaMaterialia, 2021. 205.

6.      Y.Q. Zeng, J. S. Yu, Y. Tian, A. Hirata, T. Fujita, X. H. Zhang, N. Nishiyama, H.Kato, J. Q. Jiang, A. Inoue，M.W.Chen，Improvingglass forming ability of off-eutectic metallic glass formers by manipulatingprimary crystallization reactions，Acta Materialia 200 (2020) 710–719

7.      YuqiaoZeng, Baorong Ji, Zhou Lv, Xinjian Zheng, Xingmei Yang, Peng Cui, Yan Dong,Xuhai Zhang, Jianqing Jiang, Rapid synthesis of porous Pt-Ni-Cu coatings with awide composition range, tunable structures and enhanced electrocatalyticproperties. Journal of Alloys and Compounds, 835(2020). 155402

8.      YuqiaoZeng, Bernard Gaskey, Ellen Benn, Ian McCue, Gina Greenidge,Kenneth Livi, XuhaiZhang, Jianqing Jiang, Jonah Elebache，Electrochemical dealloying withsimultaneous phase separation，ActaMaterialia 171 (2019) 8-17

9.      XuhaiZhang, Juan Li, Jingcai Xiao, Jinhong Pi, Guangyu He, Long Chen, Yuqiao Zeng,Jianqing Jian，Effectsof Si addition on structure and mechanical properties of TiAlSiCN coatings，Surface& Coatings Technology 362 (2019) 21-26

10.   YuqiaoZeng, Yunxi Zhen, Jianyong Bian, Jiamin Zhang, Jinhong Pi, Guangyu He,,AiqunXu, Xuhai Zhang, Jianqing Jiang，Cubic AlN with high thermalstabilities in TiN/AlN multilayers，Surface & Coatings Technology 364(2019) 317-322

11.   X.H. Zhang, Y. Q. Zeng, L. Yin, J. Q. Jiang,, Y. Pan, R. Li, L. Liu, K.C. Chan,Formation of micro/nano pits with high catalytic activity on Fe80B20 amorphousalloy, Corrosion Science 141(2018) 109-116

12.   5.JianliangLin, Xuhai Zhang, PeterLee, Ronghua Wei, Thick diamond like carboncoatings deposited by deep oscillation magnetron sputtering,Surface &Coatings Technology 315 (2017) 294-302

13.   6.JianChen，XiangruShi, Ben D. Beake, Xinli Guo, Zengmei Wang, Yao Zhang, Xuhai Zhang, and StephenR. Goodes. An investigation into the dynamic indentation response of metallic materials,J. Mater. Sci. 2016, 51(18):8310-8322

14.   7.JianliangLin, Xuhai Zhang, Yixiang Ou, Ronghua Wei. The structure, Oxidationresistance, mechanical and tribological properties of CrTiAlN coatings. Surface& Coatings Technology. 277 (2015): 58-66

15.   8.Sheng-chenYang, Mei-ping He, Yu-Qiao Zeng, Xuhai Zhang, Jianqing Jiang, Akihisa Inoue,Effects of metallic precursors on the catalytic performance of nanoporousmetals. Materials research. 18 suppl.1 (2015):110-114

16.   YuqiaoZeng, Zheng Tan, Lichu Zhou, Meiya Jiang, YuedongQiu, Feng Fang, Haibo Huang,Xuhai Zhang, Jianqian Jiang. Effect of bias voltage on FeN films prepared bymagnetron sputtering, Materials Research. 18 Suppl.1(2015):115-119

17.   YuqiaoZeng, Shengchen Yang, Hua Xiang, Xiaozhen Dong, Luyang Chen, Mingwei Chen,Akihisa Inoue, Xuhai Zhang, Jianqing Jiang. “Multicomponent nanoporous metalsprepared by dealloying Pd80-xNixP20 metallicglasses. Intermetallics. 61 (2015):66-71

18.   YuqiaoZeng,YuedongQiu,Xiangyang Mao, Shuyong Tan, Zhen Tan, Xuhai Zhang*, and Jianqing Jiang，“SuperhardTiAlCNcoatings prepared by RF Magnetron sputtering”，ThinSolid Film, 584（2015）：283-288

19.   Sheng-chenYang, Mei-ping He, Yu-Qiao Zeng*, Xuhai Zhang, Jianqing Jiang, Akihisa Inoue,Effects of metallic precursors on the catalytic performance of nanoporousmetals. Materials research. 18 suppl.1 (2015):110-114

20.   YuqiaoZeng, Hua Xiang, Chunlei Yang, Shengchen Yang, Luyang Chen, Mingwei Chen,Akihisa Inoue, Xuhai Zhang and Jiangqing Jiang,“Pd based nanoporous metals withsuperior catalytic activity”，Advances in MaterialsScience and Engineering，(2014)263681，

21.   YuqiaoZeng*, Junna Zhang, Xiaozhen Dong , Xuhai Zhang and Jianqing Jiang，“Pd-basedmulticomponent nanoporous metals with enhanced electrocatalytic performanceprepared by dealloying metallic glass”，RareMetal Materials & Engineering，44 (2015):54-57

22.   QiuYuedong，ZengYuqiao， TanZhen，ZhangXuhai，ShaoQiyue，TanShuyong，Jiang Jianqing，Effectof N2 Flow Rate on Microstructures and Properties of TiAlCN Coatings，ChineseJournal of Vacuum Science and Technology，2015, 35(7)

23.   GuoLan, ZhiqiangXie, Zhengwei Huang, Shengchen Yang, XuhaiZhangm, Yuqiao Zeng* andJiangqing Jiang, “AmorphousAlloy: Promising Precursor to Form Nanoflowerpot”，Advancesin Materials Science and Engineering，(2014) 263681

24.   Chun-LeiYang, Xu-Hai Zhang, Guo Lan, Lu-Yang Chen, Ming-Wei Chen, Yu-Qiao Zeng*,Jian-Qing Jiang，“Pd-basednanoporous metals for enzyme-free electrochemical glucose sensors”，Chinese Chemical  Letters，(2014)518641

25. 杨春雷，项桦，杨圣晨，张旭海，曾宇乔(*)，蒋建清，纳米多孔金的制备及其对葡萄糖催化性能研究，稀有金属材料与工程，2014.9.15，（S1）：230-234

26. 崔志强，项桦，董承浩，保国强，张旭海，曾宇乔(*)，蒋建清，改良电沉积法制备硝酸根高敏传感铜簇，功能材料，2015.9.15，（17）：17127~17130

27.   XuhaiZhang, YuedongQiu, Zheng Tan, Jianliang Lin, Aiqun Xu, Yuqiao Zeng*, J.J.Moore, Jianqing Jiang，“Effectof Al content on structure and properties of TiAlCN coatings prepared bymagnetron sputtering”，Journal of Alloys andCompounds，(2014)617

28.   YePan, Yuqiao Zeng, Lijun Jing, Lu Zhang, Jinhong Pi，“Compositiondesign and mechanical properties of ternary Cu–Zr–Ti bulk”,Materials and Design 55 (2014) 773–77

29.   ZhangXuhai, Dong Xiaozhen, Yang Chunlei Zeng Yuqiao*, Jiang jianqing, “Multicomponent nanoporous palladium with enhanced catalytic activity prepared bydealloying metallic glass”(in Chinese).Journal of FunctionalMaterials. 2013: 44(24): 3634-3639

30.   JunnaZhang, Xinyue He, Guosheng Dai, Chunlei Yang, Xiaozhen Dong, Yuqiao Zeng,Jianqing Jiang, “Advance of Pd catalyst for fuel cell”, Modern Metallurgy, 2013 41（4）：1-5

31.   NobuyukiNishiyama，KanaTakenaka，HarukoMiura，Noriko Saidoh，YuqiaoZeng，AkihisaInoue,”The world’s biggest glassy alloy ever made”, Intermetallics, 2012(30):19-24

32.   Y.Q.Zeng, A. Inoue, N. Nishiyama, M.W. Chen，“Ni-rich Ni-Pd-P bulkmetallic glasses with significantly improved glass-forming ability andmechanical properties by Si addition”，Intermetallics,18(2010) 1790-1793

33.   YuqiaoZeng, Chunling Qin, Nobuyuki Nishiyama, Akihisa Inoue，“NewNickel-based Bulk Metallic Glasses with Extremely High Nickel Content”，Journal of Alloys and Compounds,489 (2010) 80–83

34.   YuqiaoZeng, Akihisa Inoue, Nobuyuki Nishiyama and Mingwei Chen，“Remarkableeffect of minor boron doping on the formation of the largest size Ni-rich bulkmetallic glasses”，ScriptaMaterialia,60 (2009) 925-928

35.   YuqiaoZeng, Nobuyuki Nishiyama, Tokujiro Yamamoto and Akihisa Inoue，“Ni-RichBulk Metallic Glasses with High Glass-Forming Ability and Good MetallicProperties”，Materials Transactions,Vol. 50, No. 10 (2009)：2441-2445

36.   ZengYuqiao, Nobuyuki Nishiyama and Akihisa Inoue, Development of “Ni-Pd-P-BBulk Metallic Glasses with High Glass-Forming Ability”,Materials Transactions, Vol. 50, No.6 (2009): 1243- 1246

37.   A.Kawashima, Y. Zeng, M. Fukuhara, H. Kurishita, N. NIshiyama, H. Miki and A.Inoue: “ Mechanical properties of a Ni60Pd20P17B3bulk glassy alloy at cryogenic temperatures”, Material Science and Engineering A, 498 (2008), 475-481 (SCI).

38.   K.Wang, T. Fujita, Y. Zeng, N. Nishiyam, A. Inoue and M.W. Chen: “Micromechanismsof serrated flow in a Ni50Pd30P20 bulkmetallic glass with a large compression plasticity”，ActaMaterialia,56 (2008), 2834-2842 (SCI).

39.   Y.Zeng, L. Louzguine, N. Nishiyama and A. Inoue: “Role of nanocrystals in ductileNi-Pd-P metallic glass”, Journal ofAlloys and Compounds 441 (2007) 131-134 (SCI).

40.   Y.Zeng, N. Nishiyama, and A. Inoue: “Formation of a Ni-Based glassy alloy inCentimeter Scale”, Materials Transactions48 (2007) 1355-1358 (SCI).

41.   Y.Zeng, N. Nishiyama, T. wada, and A. Inoue: “Ni-rich Ni-Pd-P glassy alloy withhigh strength and good Ductility”, MaterialsTransactions 47 (2006) 175-178 (SCI).

42.   Y.Zeng, Y. Dong, C. Zhang and J.Q. Jiang: The research status of green silicatephosphor for PDP” (In Chinese),ModernMetallurgy, 6 (2003)：675-678.

43.   D.V.Louzgine-Luzgin, Y. Zeng, A. Deny, N. Nishiyama, H. Kato, J. Saida and A.Inoue: “ Deformation behavior of Zr- and Ni-based bulk glassy alloys”, Journal of Materials Research, 22(2007), 1087-1092 (SCI).

44.   Z.Long, B. Shen, Y. Shao, C. chang, Y. Zeng and A. Inoue: “Corrosion behavior of[(Fe0.6Co0.4)(0.75)B0.2Si0.05](96)Nb4bulk glassy alloy in sulphuric acid solutions” Materials Transaction 47 (2006) 2566-2570 (SCI).

45.   Y.Dong, J.Q. Jiang, M.T. Sun and Y. Zeng, J. Yu: “Effect of accelerant on theforming process and the powder shape of α-Al2O3 forphosphor” (In Chinese), Journal ofSoutheast University, 34 (2004) 2.

46.   X.Z.Hu, J. Yu, C. Liang, Y. Zeng, J.Q. Jiang: “Effect of rare earth on theperformance of Al-Ti-C master alloy” (In Chinese), Journal of the Chinese Rare Earth Society 22 (2004) 247-251.

47.   C.Liang, J.Q. Jiang, Y. Dong, M.T. Sun and Y. Zeng: “Recent development of PDPphosphor printing technology” (In Chinese), Journalof Functional Materials, 6 (2004) 675-678.

48.   X.Z.Hu, R.S. Tan, C. Liang, J. Yun, Y. Zeng, J.Q. Jiang: “effect of variouspreparation ways on the organization and performance of Al-Ti-C master alloy”(In Chinese), Foundry, 3(2003)243-246.

专利：

1.      一种水解制氢用六元高熵泡沫及其制备方法，CN202210490535.6

2.      一种形状记忆合金弹簧疲劳循环测试系统CN202210490977.0

3.      一种高温合金耐热磷化膜、其制备方法及应用CN202210491928.9

4.      一种高催化活性TiXN/Pt复合膜电极及其制备方法CN202110490099.8

5.      一种高催化活性TiN/Pt复合膜电极及其制备方法CN202110490266.9

6.      一种中碳合金钢的加工方法CN113151654A

7.      一种高形成能的Ni基大块非晶及其制备方法CN111621724A 授权

8.      一种高活性水解制氢用三元高熵泡沫及其制备方法CN202010572634.X 授权

9.      一种高催化活性的超级晶胞及其制备方法CN202010572939.0 授权

10.   一种高活性电解水用四元高熵泡沫及其制备方法CN202010572610.4授权

11.   一种铜纳米线及其制备方法CN201910401737.7 授权

12.   一种长波段超黑多孔复合材料及其制备方法CN201910403992.5 授权

13.   一种具有高催化活性的Pd基钝化膜及其制备方法CN201910401743.2 授权

14.   一种铜修饰氮掺杂二氧化钛材料及其制备方法和应用CN201811485533.8

15.   一种高电阻率合金薄膜材料及其制备方法和应用CN201810711099.4 授权

16.   一种超厚立方AlN薄膜的制备方法CN201810261965.4

17.   一种高催化活性Pt基复合纳米枝晶及其制备方法CN201810262084.4

18.   一种低应力致密涂层的制备方法CN201810261975.8

19.   超黑纳米多孔Fe及其制备方法CN201710003628.0

20.   一种超黑纳米柱状Co及其制备方法CN201710003629.5 授权

21.   一种Cu掺杂Fe-N软磁薄膜及其制备方法CN201610279081.2 授权

22.   一种铜修饰氮掺杂二氧化钛薄膜的制备方法CN201610151195.9 授权

23.   枝晶状三维石墨烯及其制备方法CN201510903375.3 授权

24.   球壳状三维石墨烯及其制备方法CN201510904410.3 授权

25.   一种微纳石墨烯片的制备方法CN201510243280.3 授权

26.   用于镍基合金紧固件表面的抗高温粘结涂层及其制备方法CN201210397910.9 授权

27.   用于宽温域自适应的润滑涂层及其制备方法CN201210132248.4

28.   一种致密氮化物陶瓷涂层及其制备方法CN201210110473.8 授权

29.   一种氮掺杂二氧化锡薄膜的制备方法CN201210103874.0

30.   Pd基过渡金属掺杂二元纳米多孔材料及其制备方法CN201110456763.3 授权

31.   PdNiCu三元纳米多孔金属及其制备与应用CN201110455123.0 授权